Tire Inflator Car Air Pump Compressor Electric Portable Auto 12V DC Volt 150 PSI
New Multifunction mini wired portable emergent car vehicle tire air compressor inflator
Product Specification
[Product Name]: Car Inflation Pump
[Product Model]: ST-5003
[Product size]: Approximately 17 * 12 * 6cm
【 Product Material 】: ABS
[Product weight]: Gross weight (approximately) 0.680kg
[Power cord length]: Approximately 285 centimeters
[Product Packaging]: Color Box Packaging Color Box Size 150 * 80 * 195mm
MAX pressure: 350KPA
Rated voltage: DC12 (V)
MAX current: less than 10A
Inflation time: 5-8 minutes
Inflation flow rate: 25L/min
Package Information
【 Outer box size 】: 45.5 * 33 * 43cm
【 Number of outer boxes in 】: 20pcs/ctn 16kgs/17kgs
Product features
1. This machine is suitable for 12V car tires,
2. It is also suitable for motorcycles, bicycles, ball games, rubber boats, beach floats, inflatable toys, and so on.
3. When working on highways, outdoors, or in the morning, if the tire suddenly leaks or gets an injection, it can be more effective for emergency treatment.
4. Maintaining the correct tire pressure on car tires can ensure driving safety and save gasoline. It can be used with the car as a precautionary measure and has endless benefits.
5. Equipped with a complete set of inflation nozzles, it can be used to inflate tires, rubber boats, air cushions, inflatable toys, balls, and other various purposes.
Instructions for Use
1. Insert the air nozzle on the rubber hose head directly onto the tire valve. When you hear the sound of air escaping from the tire, it indicates that the air has already circulated. Continue to tighten the air nozzle until no more air is released.
2. Insert into the DC12V cigarette lighter
3. When inflating, the instrument pointer increases with the degree of tire saturation. When the pointer reaches the appropriate tire pressure (usually 223kPa=35PSI for sedan tires), remove the plug and air nozzle to complete the work.
4. Please connect the professional ball needle and plastic nozzle equipped with this machine to the air nozzle to inflate balls and other equipment that require air.
Precautions
1. Do not inflate tires on large and overweight vehicles, such as trucks, trucks, container trucks, etc;
2. When using, please start the car engine to increase power and do not consume the car battery power;
3. This machine is limited to using direct current (DC12V) power supply and cannot use household high-voltage alternating current (AC220V) power supply;
4. When inflating, please stop the machine for 10 minutes after continuous operation for cooling to prevent damage to the air pump and accessories, and to extend the lifespan of the motor. When inflating the rubber boat, it can work continuously for 30 minutes;
5. Generally, when inflating tires, it takes about 3-5 minutes to reach a normal tire pressure of 30PSI, while larger tires take a little longer; If the pointer on the instrument rises rapidly to 50-100 PSI when inflation begins, it indicates that the air is blocked and has not entered the tire. At this time, it is necessary to immediately unplug the air nozzle connector and operate again, otherwise the motor and instrument are prone to damage.
6. When using, do not leave the body, pay attention to tire pressure at all times, and do not oversaturate;
7. After using this machine, the air nozzle wrench must be pulled straight to avoid elastic rubber inside
