Feature
【3 Lighting Modes + Motion Sensing Function】This solar pendant lights with high sensitive motion sensor detectors, 3 working modes: Mode 1. Body Induction + Dim Light Mode. Mode 2. Induction Mode. Mode 3. Always Light Mode.
【Split Design,Fit for Outdoor & Indoor】The solar powered shed lights and solar panel are separated, and the waterproof wire length is 5 meters/16.5 feet, so it can be used indoors and outdoors, such as shed, garage, barn, home, garden, yard, patio, park, proch, step, fence. The light will turn off and charge automatically in the daytime, and lighting automatically when in dark. Warm Tips: Turn over or cover the solar panels so that the solar lamp can light up during the daytime.
【With Remote Control】Solar Lights Outdoor with remote. Remote Control Function: You can turn on/off the lights and select different modes by remote control. and press "+/-" switch to change the brightness. so you can easily select different modes and brightness to meet your different requirements.(One remote can control multiple lights. ) NOTE: Attention for “Remote Control” Please take out the Clear Insulation Sheet first when you use the remote controller.
【Angle Adjustable & Bright Solar Lights】Four-Leaf Solar Pendant Ceiling Light. Each leaf can be adjusted 120°, so it can be adjusted to direct light precisely where it's needed. And this solar security lights is built-in 60 white LEDs, it designed to provide ultra-high brightness illumination for a wide area. Produce over 1000 lumens to provide lighting and security to your home, pathway, front door, corridor, driveway, platform, deck etc.
【IP65 Waterproof & Easy to Install】This solar sensor lights with remote for use outdoor and indoor. IP65 waterproof and ABS material can withstand in rain and other extreme weather conditions. This indoor solar lights can be mounted directly on the wall with screws or hang it anywhere light needed, just insure the solar panel to face the sunlight. The waterproof cord is 16.5ft long which is sufficient to route pretty much anywhere. (Including instruction, screws and screw sleeves.)
How to Use
Note 1: Connect the solar powered light to the solar panel so that you can charge the solar lamp.
Note 2: Charge the solar panel for 6-8 hours under the sunshine before first using.
Note 3: Turn over or cover the solar panel with your hand to test if work well after 8 hours of charging.
Note 4: Please take out the Clear Insulation Sheet first when you use the Remote Controller.
Specification
Solar panel: 6V 3.5W
Battery: 3.7V/4400mAh
Light source: 20LED X3
Output power: 7W
Cable length: 5M
Lighting mode: light control, dark and always on (4 levels of dimming, timing)
Gross weight per set: 1.16kg
Single package size: 21.5*19.2*15.2cm [Chinese and English manual]
Packing quantity: 12PCS/carton
Carton size: 47*45*41.5cm
Net weight: 13.9kg
Gross weight: 14.5kg